Musubu ® Key Case - Liscio -
Fine leather to hold the keys. Just that.
A minimalist design that only uses V-shaped leather to hold the keys. (Patent Office Design Registration No. 1623076)
An unprecedented way to bundle keys
A leather strap is used to bind the keys. Conventional key cases were bulky with a series of metal rings.
The "Tie Key Case" uses the softness of the leather strap to bind keys in a compact manner.
With its gentle feel, you can insert and remove keys with one hand while holding your luggage.
The number of keys is flexible, from 1 to 10.
The length of the leather strap can be adjusted, so you can carry any number of keys. The maximum number of keys can be bundled together is approximately 10.
If you bundle several keys together, you can place them upright, so they will not spread apart on your desk.
How to use
1. Put it through.
Remove the metal ring, if attached, and put the keys directly through the leather strap.
2 Tie it
Loosely thread the leather strap through the three holes, and then tighten the strap to ensure that it is securely tied and will not come undone.
3 Cutting
Cut the excess leather strap with a cutter knife.
The leather strap is long enough to flexibly accommodate the number of keys.
The size of the key can be up to about 6cm. Car keys and smart keys for apartments may not fit.
The leather strap is 5mm wide, so the key hole needs to be about 5mm wider than the key hole.
If you cut the strap too short, it will be difficult to replace the key.
The strap will become slightly longer and thinner with use.
It is not suitable for frequent replacement of keys.
Smooth texture of vacchetta leather
The leather used is vacchetta leather, which has been used in Tuscany, Italy since the early 9th century. The leather is tanned with vegetable tannin and soaked with oil slowly, so you can enjoy its almost permanent moisture and glossy texture.
The silver surface is smooth and fine, with a natural color variation due to the dye finish, giving the leather an elegant and tasteful look.
The aging process of vacchetta leather stands out among other Italian leathers, and the color and luster deepen beautifully.
(For a detailed description of the leather, click on the "Material" tab.)
Smooth hills of Tuscany, Italy
About the leather used
About the leather usedOrigins
Liscio is an Italian word meaning "smooth. The surface is smooth and fine, with natural unevenness in color, giving the leather an elegant and tasteful look.
Tanning and Manufacturing
Vacchetta leather has been used in the Tuscany region of Italy since the early 9th century. The cowhide is tanned with vegetable tannin extracted from chesnut and mimosa, and then soaked in oil slowly and finished with dyes. The more the leather is used, the more the oil soaks into the leather, deepening its color and luster.
Maintenance
Since it contains sufficient oil inside, oil care is not necessary unless you are concerned about scratches or dryness. We recommend dry brushing with a soft cloth on a daily basis.
Colors
Camel 
Chestnut 
Teal 
Black
Natural markings may be noticeable.
Specification
Specification%0A%20An%20unprecedented%20way%20to%20bundle%20ke...){kind=link}
Choose options